Fluid Management Customer Service 1
.
800
.
462
.
2466
Accutinter
1600
|
17
Getting
Started
After your machine is installed in the proper location, you need to fill the canisters with colorant so you
can dispense for the first time. Your machine may be shipped with a small amount of glycol or colorant in
the canisters already, but you need to fill them to capacity with colorant. When re-filling canisters, you will
follow the same process using steps 3-8. Canisters come in varying capacities. Check the label inside
the top cover for capacity and colorant locations.
DO NOT
overfill the canisters. After the canisters are
filled, ColorPro (or your manufacturer’s software) must be updated (See page 18).
Raise the top cover of the
Accutinter so you can see
the canisters inside.
Remove the caps from
each canister one at a
time and prepare to fill
them with colorant.
Cautions
• DO
NOT
operate
the
dispenser
until
it
is
in
a
permanent
location.
• DO
NOT
dispense
if
canisters
are
empty
• Before
dispensing
colorant
for
the
first
time,
you
must
complete
a
manual
dispense.
• DO
NOT
dispense
without
a
container
in
place.
• DO
NOT
use
shelf
surface
to
seal
open
cans.
Preparing
and
refilling
the
canisters
1
2
Summary of Contents for Accutinter 1600
Page 2: ......
