- 83 -
Main Window Settings… Filter Grid
Calculated Values:
The user determines which column values to display in the filter grid on the Main
Window. The Calculated Values include:
·
Count
·
Count percentage
·
Volume percentage
·
Particles per mL
·
Parts per million
·
Cumulative count
·
Cumulative count percentage
·
Cumulative volume percentage
·
Cumulative particles per mL
·
Cumulative parts per million
Filters:
The Filters section allows the user to create/save or load previously constructed filter
definitions. Multiple filters can be utilized at the same time and displayed on the Main Window,
arranged in a specific order, and can be exclusive (as processed from top to bottom). The default is for
the filters to be inclusive.
Main Window Settings… Cumulative Stats
Type:
The user can select either Volume or Count to be used to determine the cumulative distribution
from which percentage points are displayed in the Cumulative Stats grid on the Main Window.
Fields:
The user can select Diameter, Aspect Ratio, or Edge Gradient as the field used to determine the
cumulative statistics.
Calculations:
The user can select from a predetermined list of percentage points to be shown as the
rows of the Cumulative Stats grid.
Display Settings… General
Timestamp Data:
If selected, timestamp data is displayed as UTC time (the default is local time).
Prompting for Parameters:
If selected, the prompts to name a list file and review terminating
conditions are displayed when starting a run.
Display Settings (View Particles window)… Particle Property Fields
Show Properties:
The user may select which particles properties to display in various locations in the
software, particularly in the Particle Properties display accessed from the View Window. Two buttons
allow the user to Check All or Clear All in this section.
