LTQ008 – LTQ230 Series 3-Phase
Products
User Instructions –
AIIOM000165
EN
Page
6
of
40
2
Safety Information
2.1
Safety symbols and descriptions
This User Instruction contains specific safety markings where non-observance of an instruction would cause a
hazard. The specific safety markings are:
Table 1: Definition of safety symbols and markings
Symbol
Description
DANGER
This symbol indicates a hazardous situation which, if not avoided,
will result in death or severe injury.
WARNING
This symbol indicates a hazardous situation which, if not avoided,
could result in serious injury.
CAUTION
This symbol indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
SAFETY INSTRUCTION
This symbol indicates specific safety-related instructions or
procedures.
NOTICE
This symbol indicates important, special instructions not related to
hazards.
SAFETY ALERT
This is the safety alert symbol. It warns of potential physical injury
hazards. Obey all safety messages that follow this symbol to avoid
injury or death.
ELECTRICAL HAZARD
This symbol indicates electrical safety instructions where non-
compliance would affect personal safety and could result in loss of
life.
2.2
Intended use
The product/system must not be operated beyond the parameters specified for the application. If there
is any doubt as to the suitability of the product/system for the application intended, contact Flowserve for
advice, quoting the serial number.
- Installing, operating, or maintaining the product/system in any way that is not covered in this
User Instruction could cause death, serious personal injury, or damage to the equipment. This includes any
modification to the product/system or use of any parts not provided by Flowserve.
Only operate the product/system when it has successfully passed all inspection acceptance
criteria.
