7
Placing the rescue parachute into the inner container
After you have chosen the right inner container size, the rescue parachute can be placed into the deployment bag. The steps of packing until you
have reached the shown status below, has to be done as per the rescue parachute manual.
The following guide shows the assembly of an Annular Evo. Other systems can be installed in the same way. Please check if there are special
remarks in your parachute manual. Steerable systems (for example Rogallo systems) can only be installed in the VISSTA with explicit approval of
the rescue parachute manufacturer.
1. Fold the parachute
like an “S” on the
width of the
container, pull out
the Ram-Air-pockets
slightly to the side (if
the parachute is
equipped with Ram-
Air-pockets).
2. Remove the
packing cord
Summary of Contents for VISSTA
Page 1: ......