5
5. Close container flap (4) with packing cords b) and c). Feed the pins
through the loops.
6. Remove all packing cords. Close pin covers and secure handle with
a 2 daN seal threat (see arrow).
How to secure the release handle:
To avoid an unintentional opening, it is mandatory to use a seal thread in the opening mechanism. This defines a minimum opening force. This
special thread must be put through the loop at the release handle and harness and has to be fixed by a knot. (See picture 6 red arrow)
To secure the pin it is only allowed to use certified material because if the strength of this material is too high the save operation of the rescue
system is not guaranteed. This thread is supplied by us.
Attention: After every installation of a rescue-system in a harness there must be a test if the opening force is between 2 and 7 daN. If harness and
rescue parachute are combined the first time a compatibility check must be performed by an authorized person! The compatibility must be
confirmed in the parachute repack logbook.
Summary of Contents for VISSTA
Page 1: ......
