Manual Prestige Aurach p - 63
4. Use
Maintenance
Clean your fitness equipment after every workout session. This will prevent sweat
marks and even rust on this product. The metal and plastic parts of the product can
be cleaned by using standard cleaning products. However, make sure that all parts
are completely dry before they are used again.
Flow Fitness advises to fasten nuts and bolts, check and fasten pivot points once in
a while. To prevent unnecessary wear, the product can only be used indoors and in a
dry environment.
Storage
1.
On the cover and rotating disk there are small arrow indicators. Move the pedals
until the arrows are pointing towards each other. Now turn the locking knob until
completely fastened.
2.
Grab the back of the rail and lift the rail upwards. The pedals will automatically
roll over the rail into the correct position.
3.
Lift until the rail locks into place.
Preparing for use
4.
Grab the rail at the and press slightly forwards. Then press with your feet onto
the gas spring to unlock the rail assembly. Now slowly guide the rail toward the
ground.
5.
Then fully loosen the locking know and the product is ready for a workout session.
4.3 Maintenance and storage
1
2
1
2
4
5
3
