Manual Prestige Aurach p - 49
4. Use
Step 4
1.
First disassemble the handlebar post cover (B-14) and slide the cover over the
handlebar post (B-17).
2.
Connect the electronic cable (D-16) from the main frame (D-1) with the electronics
cable (B-9) from the handlebar post (B-17).
3.
Now slide the handlebar post (B-17) onto the main frame (D-1) and align the holes
in the post with the holes in the main frame before fastening 4x bolts (B11), sping
washers (B-8) and washer (B-7). Fasten these bolts tightly before sliding down the
handlebar post cover (F-14).
4.
Now place two waved washers (F-3) onto the left and right axle of the handlebar
post (B-17).
5.
Slide the left lower handlebar (K-L) onto the axle of the handlebar post (B-17).
Slide the handlebar all the way up to the waved washer. Then fasten bolt (F-2)
with washer (F-1). Fasten all bolts tightly.
6.
Repeat the previous step for the right lower handle bar (K/R).
7.
Remove screws (B-16) from the handlebar post (B-17). Then Assemble the bottle
cage with screws (B-16) that you just have removed.
F-2 Hex bolt
M8xP1.0x20L (2)
F-1 Flat washer
Ø8.5x 25x2t (2)
F-3 Wave washer
Ø20xØ30x0.3t (2)
B-11 Allen bolt
M8xP1.25x16L (6)
B-10 Spring washer
Ø8.1*Ø12.9*2.4t (6)
B-7 Flat washer Ø8xØ19x2t (4)
B-8 Semi-circle washer
Ø8xØ19x2t (2)
Allen key
Box spanner
