ATTACHING THE LEGS
1.
Begin with the legs on the edge that you have determined to be the front of the canopy.
*
If you are using a StaBar Kit the front legs will have StaBar Ell Joints attached at the bottom.
2.
With one person standing at each front corner, raise the front edge of the canopy roof frame
and click the leg tops into the corner joints.
Options for One-Person Set-Up:
*Insert the legs in the collapsed, “travel” position at first, then extend them one at a time
*Use our
Easy Riser Kit
, which allows you to prop the roof up at the center while you insert the legs
*Ask a neighbor for a hand... it only takes a minute!
Front legs attached, heat/wind vents oriented to front of canopy
Front legs attached, heat/wind vents
oriented to side of canopy
7
3.
With the front legs attached, step under the roof and attach the remaining Velcro straps to
the frame.
