Flourish TRIMLINE CANOPY 10' x 10' Instructions For Assembly Download Page 10

Care and Feeding of your TrimLine Canopy

* Vinyl is a tough and durable fabric. It resists mildew and dirt but should receive your care and 
attention to keep it in prime condition. DO NOT STORE WET.  If you have had to break down wet, 
remove canopy top and walls as soon as possible and open to allow it to dry thoroughly.

*

Dirt can be cleaned from walls, roof and awnings with any regular non-abrasive liquid household 

cleaner.  A soft brush may be used, if necessary.  Always use glass cleaner on clear walls. Rinse well to 
remove any cleaning product residue and dry thoroughly before storing.
You may choose to work on a clean patio surface, or set up the canopy roof frame only and stretch 
the top over it for cleaning. A long-handled brush or mop can make it easier to reach.

* The Ball Bungees are stretch cable loops with plastic balls that may be used to bundle the poles into 
several easy to manage bundles.  For faster and easier break down and storage, consider our Pole Bags.

* The Spikes and Tie Down Screws are intended for use on grass or dirt. On streets or other hard 
surfaces you will need to use weight to anchor your canopy.  Our optional GreatWeights are a great way 
to add weight to the TrimLine.

Summary of Contents for TRIMLINE CANOPY 10' x 10'











Reviews: