Flottweg TRICANTER Z 8E, Operating Instructions Manual

Page: 49 / 100

Flottweg
Flottweg-SIMP-CONTROL®
2.2 Configuration of the control
To achieve the optimum separation result, the setting of operating mode, control
parameters and limiting values must be adapted to the product during commissioning.
Operation mode
Button automatic operation Button manual operation
Parameters which are always active:
- Limits of the differential speed (output signals “Ymin“ and “Ymax“)
- Switch-off limiting values “Product feed off“ and “Bowl off“)
Parameters which are only active at automatic operation:
- Nominal torque value (W)
- Fixed value Y2
- Controller dynamics (Xp, Tn, Tv)
Table parameters and presettings:
Parameter Setting Adm. range
W Nominal torque value According to separation task 5-90%
Y min. min. output signal In general 5 % 5-30%
Y max. max. output signal In general 90% 80-100%
Xp1 Proportional range
approx. 20%
(according to experience)
0,1-999,9%
Tn1 Reset time approx. 80s (acc.to experience) 10-300 s
Tv1 Derivative time 1s 0,5-1,5s
Product feed off
According to separation task
(at delivery 15% over nominal
torque value W)
5-30 %
Bowl drive off
According to separation task
(at delivery 90%)
60-100 %
Y 2
Fixed value differential
speed
In general 75% 5-100%
Note:
The stipulated setting values relate to the controllers supplied by Flottweg. Controllers
of other brands might feature a different control behaviour and thus require other
settings.
U
k-
6
_
2
_
3
x8
-S
IM
P
-O
P
_
0
8
1
2
0
9
–
P
re
_
W
O
H