Flomotion Systems 4001V Series Installation And Operation Manual Download Page 4

4001V Peristaltic Pump O&M Manual

1.0 - System Overview

The 4001V Series Chemical Feed Pump consists of a controller, motor, gearbox and peristaltic pump. 

4001 Pump & Motor

4001V K4 SERIES Controller

1.1 Safety

In the interests of safety, this pump and the tubing selected should only be used by competent, suitably trained
personnel after they have read and understood this manual, and considered any hazard involved. Any person 
who is involved in the installation or maintenance of this equipment should be fully competent to carry out the 
work. 

Maintenance and repair should be performed by qualified personnel only. Make sure that no voltage is 
applied while work is being carried out on the pump or motor. The motor must be secured against 
accidental start up. 

1.2 Warranty

Flomotion Systems, Inc. warrants the 4001 Series pumps to be free of defects in material and workmanship for
a period of eighteen months from the date of sale to the user, or two years from the date of shipment, which 
ever occurs first. A control, or any component contained therein, which under normal use becomes defective 
within the stated warranty time period, shall be returned to Flomotion Systems, Inc., freight prepaid, for 
examination (contact Flomotion Systems, Inc. for authorization prior to returning any product). Flomotion 
Systems, Inc. reserves the right to make the final determination as to the validity of a warranty claim, and sole 
obligation is to repair or replace only components, which have been rendered defective due to faulty material 
or workmanship. No warranty claim will be accepted for components which have been damaged due to 
mishandling, improper installation, unauthorized repair and/or alteration of the product, operation in excess of 
design specifications or other misuse, or improper maintenance. Flomotion Systems, Inc. makes no warranty 
that its products are compatible with any other equipment, or to any specific application, to which they may be 
applied and shall not be held liable for any other consequential damage or injury arising from the use of its 
products. This warranty is in lieu of all other warranties, expressed or implied. No other person, firm or 

Flomotion Systems, Inc. 4001V SERIES

Pg. 4

Summary of Contents for 4001V Series




















Reviews: