SINCE 1981
7
3.0 Installation
3.1 Lifting
The plate heat exchanger shall be lifted by the four lifting holes that are provided
( two in the fixed cover and two in the moveable ).
3.2 Installation
The plate heat exchanger is to be mounted vertically on the floor with a level foundation and be
strong enough so no settling occurs that can cause a loading strain on the connections.
The heat exchanger must be Installed with clea-
rance on both sides for maintenance. Under spe-
cial circumstances these dimensions may be re-
duced but the servicing of the heat exchanger
may be compromised.
The foundation for the heat exchanger must be
level and firm enough that no settling occurs
which could put forces and strain on the piping
connected to it.
PLATE AND FrAME - HEAT ExCHANgErS
