page 27
Manual MK23 V 1_09 Z33
Contents
Water warning
Do not expose the instrument to rain, use it
near water or in damp or wet conditions, or
place containers on it containing liquids which
might spill into any openings. If any liquid such
as water seeps into the instrument, turn off
the power immediately and unplug the power
cord from the AC outlet. Then have the
instrument inspected by qualified FLKeys
service personnel.
Never insert or remove an electric plug with
wet hands.
Fire warning
Do not put burning items, such as candles, on
the unit.
If you notice any abnormality
When one of the following problems occur,
immediately turn off the power switch and
disconnect the electric plug from the outlet.
Then have the device inspected by FLKeys
service personnel.
The power cord or plug becomes frayed or
damaged.
It emits unusual smells or smoke.
Some object has been dropped into the
instrument.
There is a sudden loss of sound during use of
the instrument.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or
others, or damage to the instrument or other property. These precautions include, but are not
limited to, the following:
Power supply
When removing the electric plug from the
instrument or an outlet, always hold the plug
itself and not the cord. Pulling by the cord can
damage it.
Remove the electric plug from the outlet
when the instrument is not to be used for
extended periods of time, or during electrical
storms.
Location
Do not place the instrument in an unstable
position where it might accidentally fall over.
Before moving the instrument, remove all
connected cables.
When setting up the product, make sure that
the AC outlet you are using is easily accessible.
If some trouble or malfunction occurs,
immediately turn off the power switch and
disconnect the plug from the outlet. Even
when the power switch is turned off,
electricity is still flowing to the product at the
minimum level. When you are not using the
product for a long time, make sure to unplug
the power supply from the wall AC outlet.
Use only a high quality stand specified for the
instrument.
Connections
Before connecting the instrument to other
electronic components, turn off the power for
all components. Before turning the power on
or off for all components, set all volume levels
to minimum.
Be sure to set the volumes of all components
at their minimum levels and gradually raise
the volume controls while playing the
