page 17
Manual MK23 V 1_09 Z33
Contents
K
NOBS
B
UTTONS
C
ONFIGURABLE
MIDI
C
ONTROLLERS
B1 B2 K1- K4
C
ONTR
.
S
ET
Push
Mode
and
ON
. Display shows
M
OD
W
HEEL
Push and hold the correspondent black key. Select button by pressing, knob by slightly moving. Check
display. Keep holding key Contr. set while changing settings by using the option- and numeric keys.
Then let off key Contr. set. An acoustic signal (ascending melody) confirms your input. In case of an
invalid input you will hear a descending melody and your input is rejected.
Exit SKF Mode with the button
Mode
.
Hint:
Though knobs K2 K3 K4 are activated as MIDI Controllers you can use their internal FLK features by
pressing
mode
during using. To use the FLK Features permanently set MIDI Controllers K2 K3 K4 to
off. The current CC settings will remain.
Push
Mode
and
ON
. Display shows
A
FTERTOUCH
Push and hold the correspondent black key. Change settings by using the white keys.
Use the black key “Mod. Wheel” (f#3) to define the used controller number.
Default: Modulation (controller number 1)
Exit SKF Mode with the button
Mode
.
Push
Mode
and
ON
. Display shows
The aftertouch sensitivity will be adjusted according the current position of the controller
Contr
instead of the automatic adjustment by assigning the controller number 0. In this mode, the display
will show
Push and hold the correspondent black key. Change settings by using the white keys.
Use the black key “Aftertouch” (g#3) to define the used controller number.
Default: Channel Aftertouch (controller number 0)
when changing the controller.
Exit SKF Mode with the button
Mode
.
MK23 Imperial 97: Note Nr. 6 – 14 no aftertouch available.
