page 23
Manual MK23 V 1_09 Z33
Contents
P
OWER
S
UPPLY
Always use the original FLK power supply. It is suitable for AC voltage 100 V to 240 V at 47 Hz to 63
Hz.
Output: 12V DC 1,8 A 25 Watt
DC plug 5.5 x 2.1 x 11 mm, Plus inside, Minus outside.
Damages caused by using any other form of power supply are not covered by the FLKeys warranty.
A
UTO
P
OWER
O
N
As soon as the MK23 is connected via the FLK Power supply with an active power socket, it will be on.
This could be a helpful feature. Especially during gigging and live performances. You can also switch
off and on with the
on
button. The Auto Power On Feature will be active again after about 10
seconds.
H
OUSING RUBBER FEET
Malfunctions or damages by arbitrarily, improperly removed or exchanged rubber feet (elastic
damper on the case ground) are not covered by the FLKeys warranty.
Please let us know. We will assist you.
The rubber feet should be changed to M5 screws with similar length.
F
IRMWARE
U
PDATE
FLK
L
OADER
Download zip file
Be sure the LACHNIT MK is turned on and connected via USB.
Firmware .hex files are up to date and already included.
You can check the FLK website for updates.
A
DVANCED
M
ODE
:
FOR TECHNICIANS OR
,
EXPERIENCED USERS
Check or choose firmware . hex files, version nr., different combinations etc…
T
ECHNICIAN
:
Be sure that you know what you do…
We do not take responsibility for unintended, wrong usage or non FLKeys Firmware hex files.
