background image

Operation

Page  52

No valid COG information

This alarm occurs if the AIS transceiver has 
no valid Course Over Ground information 
from any connected sensor.

No valid SOG information

This alarm occurs if the AIS transceiver has 
no valid Speed Over Ground information from 
any connected sensor.

Heading lost or invalid

This alarm occurs if the AIS transceiver has 
no valid heading information from any 
connected sensor, or if the heading is 
undefined.

No valid ROT information

This alarm occurs if the AIS transceiver has 
no Rate Of Turn information from connected 
sensors or via internal calculation.

No sensor position in use

This alarm occurs if the AIS transceiver has 
no valid position information from any 
connected sensor.

UTC Sync Invalid

This alarm indicates that the transmitter is no 
longer directly synchronized with the GNSS 
receiver. This may be because the GNSS 
receiver cannot receive sufficient satellites.

Nav Status Incorrect

Nav Status incorrect
This alarm will occur if the navigation status 
is in conflict with the current speed of the 
vessel. For example the alarm will activate if 
the Navigation status is set to moored, but 
the vessel speed is greater than 3 knots. 
Correct the navigation status to clear this 
alarm.

Alarm

Description

Summary of Contents for Raymarine AIS5000















































































































Reviews: