manualshive.com logo in svg

FLIR Raymarine AIS5000, Installation & Operation Instructions, Page: 15 / 110

Share
Download
FLIR Raymarine AIS5000 Installation & Operation Instructions Download Page 15

Notices

Page  13

electrical equipment. Please dispose of the packaging in an environmentally 
friendly manner.

1.2.6

Accuracy of this manual

This manual is intended as a guide to the installation, setup and use of this 
product. If you are in any doubt about any aspect of this product, please 
contact your dealer.

1.3 Regulatory statements

1.3.1

Declaration of Conformity

The manufacturer of this product declares that this product is in compliance 
with the Radio Equipment Directive (2014/53/EU) and as such, displays the 
CE mark. The RED declaration of conformity is provided as part of the 
documentation pack.

1.3.2

Marine Equipment Directive

The manufacturer of this product declares that this product is in compliance 
with the Marine Equipment Directive Annex A.1/4.32 Universal Automatic 
Identification System as defined by Commission Directive 2015/559/EU, and 
as such complies with the following IMO resolutions:

Summary of Contents for Raymarine AIS5000















































































































Reviews:

No comments