FLIR M-Series, Operator'S Manual

Page: 49 / 64

432-0003-00-10 rev 140 M-Series Operator’s Manual 51
M-Series IP Interface and PC Operations
Web Control Functions
For the most part, each link on the Web Control page corresponds to an
equivalent operation on the JCU or with the System Menu, as the table
below indicates. The table assumes the factory default settings are being
used. For a more detailed description of each function, refer to the appro-
priate section in the previous chapters of this manual.
TABLE 1.
Web links and the equivalent JCU/Menu operation
Web Control
Link Equivalent
Operation
Comment
Pan and Tilt
Home JCU: Press
HOME button Click and hold to set the home posi-
tion.
Stop Stops all movement of the camera,
including Surveillance Mode. No
equivalent JCU function
Camera Con-
trols
Active JCU: Press
POWER/Dim
button
Standby JCU: Press and
hold POWER/
Dim button
Speed (pull-
down) Controls the speed of pan and tilt
operations; Possible selections:
40, 60, 80
Product Infor-
mation MENU: About/
Help > Product
Information See below for an example
Network Setup Refer to the Network Setup section
that follows
Joystick Con-
trol
Left JCU: Push Puck
left With Twist-to-Pan mode enabled
(default), pressing the puck left/
right does nothing.
Right JCU: Push Puck
right With Twist-to-Pan mode disabled,
clicking on Left or Right causes the
camera to pan left or right.