JCU Power Menu
24
432-0003-00-10 rev 140 M-Series Operator’s Manual
JCU Power Menu
The JCU is a bit more sophisticated than most joystick devices; in fact it
has its own microprocessor and is capable of communicating with other IP
devices on a network. To aid in the control of the system, the JCU has an
LCD display that shows JCU messages, menu options, and general status
information. The various JCU functions can be accessed via a set of
menus, with each menu entry selectable in the JCU display.
The JCU puck is used to scroll up and down within the menus, and a menu
entry can be selected by pressing down (clicking) the puck. When the JCU
is in the Power Menu mode, the other JCU buttons such as HOME, COLOR,
SCENE, and USER are disabled.
Accessing the Power Menu
When the camera is in the Powered On mode, pressing and holding the
Power/DIM will cause the JCU to enter the JCU Power Menu and the dis-
play will show “v
Power Menu
”.
The JCU puck can be used to select from the following menu options:
Power Menu
Assign JCU
JCU Stndby?
Camera Stndby?
System Stndby?
Global Stndby?
Calibrate JCU
Cancel
Each of these options is described below.
Note:
In the JCU Display, a down arrow (v) indicates additional menu
choices can be accessed by moving the puck down (aft). An up arrow (^)
indicates the last menu entry is shown in the display, and the other choices
must be accessed by moving the puck up (fore). A double arrow indicates
the user can move up or down in the menu.
Power Menu
When “
Power Menu
” is shown in the display, it indicates the user has
entered the Power Menu. Use the puck to scroll down through the other
menu options. To exit the Power Menu, scroll down to the Cancel entry.
Assign JCU
The Assign JCU function is used to assign a JCU to a camera. When the
Assign JCU entry is selected, the display prompts the user with “v
Select
Summary of Contents for M-Series
