H-Series Operator’s Manual
3—Operating Your H-Series Camera
431-0003-01-10, Revision 110
15
Capture Button–HS-324 Pro (Command version)
models only
Use this button to capture snapshots (in JPEG format) or
video clips (in MPEG-4 format). The files are stored on the integrated
SD card.
•
Momentarily pressing the button captures a single snapshot.
•
Pressing and holding the button will cause the camera to save a
video clip file. The file is written to the SD card when the button is
released.
Twenty-five seconds of video requires about one megabyte (MB) of
storage on the SD card. The image and video files must be transferred
to a computer for viewing.
Note
•
If the camera is not an
HS-324
Pro
(Command version) model, this
message will be shown in the
display.
•
If an SD card is not installed, this
message will be shown in the
display and no image will be stored.
•
If the SD card is full, a warning will
be shown in the display and the
image will not be stored.
Note
The images must be transferred to a computer via the USB cable,
or the SD card can be temporarily removed from the camera and
inserted in a card reader.
The stored image will include the thermal image, time and date
information, and the FLIR logo. Other icons seen in the display are
not stored on the saved image.
HS_Series_Operators.book Page 15 Thursday, November 5, 2009 12:58 PM
