FLIR DPB74TLUX, Instruction Manual

Page: 9 / 35

- 8 -
Installation
Mounting plate
Tapping screw 4x25
Hexagon screw 5x10
a. b.
c.
Mounting
screw holes
Mounting Plate
4. Adjust the position of the camera, as needed.
a. Loosen the ring on the camera base to rotate the base 360°.
b. Loosen the screw on the side of the camera stand to tilt the
camera 180°.
c. Loosen the screw underneath the camera stand to rotate the
camera around the stand 360°.
1. Use the mounting plate to drill holes for the
cable and mounting screws.
2. Place the flat side of the mounting plate
against the surface and attach it to the
surface using the tapping screws 4x25 (4x).
3. Run the cable through the surface. Connect
the cables. Attach the base of the camera to
the mounting plate using the hexagon screws
5x10 (4x).