FLIR DPB74TLUX, Instruction Manual

Page: 30 / 35

- 29 -
PRIVACY
AREA
AREA DISPLAY
COLOR
TRANSPAR
RETURN 4
ON
8
3
RET
IIIIIIIIIIIIIIII IIII
|
IIIIIIIIIIIII IIIIIII
|
DEFOG OFF DEFOG ON
»
Area: Press Left/Right to select privacy area 1~8 .
» Area Display:
Press
Left/Right
to select
ON
to enable the selected
area or select OFF to disable the selected area. To configure the area:
a. If
ON
is selected, press
Set Up
.
b. Press Left/Right/Up/Down to configure the corners of the
privacy area and then press Set Up to go to the next corner.
c. Press
Left/Right/Up/Down
to configure the position of the
privacy area and then press Set Up .
d. Press
Set Up
again to save the privacy area.
»
Color: Press Left/Right to select color 0~15 .
» Transparency:
Press
Left/Right
to set the transparency of the motion
area between 0~3 .
•
Defect:
Use the Defect setting to remove white spots (defects). The camera can
eliminate up to 256 points. Press Set Up and then configure the following.
»
Senseup:
Press
Left/Right
to set the level of defect elimination. 32x
is recommended.
»
Diff: Press Left/Right to set the size of defects between 0~3.
» Start:
Select
Start
and press
Set Up
to start defect correction.
• Defog: The Defog feature improves the picture of objects obscured by fog
or dust. Press
Left/Right
to select
Manual
or
Auto
to enable or
OFF
to
disable.