flipIT Tech Line: 800 770-7042
9
© 2008 CBT Supply Inc.
STEP 7 -
Install the locking bar, preliminary.
Install for left-handed (shown) or
right-handed operation
The default position for the
locking system is on the user’s
left; however, the shape of the
locking bar permits installation
on either side.
Plan ahead to avoid
interference with other
mounting hardware.
Your template allows
2.5” of clear area on
each side of the
cut-out.
Locate the slot in
the hinge for the lid
of the laptop safe.
The locking “bone”
should fall into place
easily. You will be
test fitting this
arrangement for
easy operation.
Mark the locations for drilling pilot holes.
Then use an 1/8” drill with depth gauge
and make precise pilot holes.
Approximately
1/2” of the
“bone” should
extend through
the locking slot.