flipIT Tech Line: 800 770-7042
5
© 2008 CBT Supply Inc.
Step 1-
Establish Centerline
Step 2-
Adhere Cutout
Template to Desktop
To establish cutout placement, sit at the desk and look straight ahead, visualizing
where the screen would be. Use a tape measure and determine the centerline for the
cutout. Transfer the center line to the desktop with masking tape or some other
means that will not permanently mar or stain the finish.
The minimum clearance
area requirement
underneath for FIL-18 is
24” x 24” See page 3
Counter Top Depth.
12” is the center for a 24” width.
15” is the center for a 30” width.
Use a glue stick
on back of
template cut lines.
Align front edge of
template with
desktop centerline and
press in place.
