6
© 2008 CBT Supply Inc.
STEP 3 -
Drill Corner
Starting Holes
To make holes for starting your jig saw cut, use a 3/8” drill bit, place the point of the bit at the
corner mark and drill completely through the surface top. Repeat this step for each corner.
STEP 4 -
Saw the Hole for
flipIT
Place the jigsaw at the corner marking. Remove the layout line with the kerf of the saw cut for
a factory fit. You must have the skill to saw a straight line within the tolerance of the width of
the saw blade. Saw from corner hole to corner hole. Remove the remains of the paper tem-
plate when this step is finished.