2
© 2008 CBT Supply Inc.
WARNING
POWER TOOLS ARE DANGEROUS.
Review the safety procedures supplied by your power tools’ manufacturers.
Heed all
warnings for your safety’s sake. Always use safety glasses
and
wear proper
apparel
that won’t get caught in moving parts. CBT Supply, Inc. will not be held liable
for misuse of tools and disregard for power tool manufacturer’s safety precautions.
Getting Started
These installation instructions guide you through the proper way of completing the
assembly of the flipIT
®
Laptop Safe Kit FIL-18 and FIL-23 with key lock. Improper
installation may void the warranty. It is especially important that the installer observe
proper care in protecting surfaces from abrasion.
For any questions or assistance, please contact Technical Service at
800-770-7042.
Tools Needed for
Full Installation
Tools needed for
pre-assembly:
• Power Drill
• Tape Measure
• Commercial-grade Jigsaw
• Phillips bit driver
• 3/8” Drill Bit
• 1/8” Drill Bit
• Pencil
• Permanent Marker
• Masking Tape
• Glue stick
Tools needed for installation
into factory cut desktop only:
• Screw gun or #2 Phillips
screw driver
• 1/8” Drill Bit
• Masking Tape
• Slot Screwdriver
• Crescent Wrench
STOP!
The installer must possess the skill to cut within the tolerance of the
template layout line if no factory-made cutout is made in the table top.
Do not attempt this installation without this level of craftsmanship skill.
If a factory made cut is provided, only skills of using a
screwdriver and drill are required.
