Flightline TA-152H1, User Manual

Page: 12 / 24

11
H1
H2
H1
H2
H1
H1 H1
H2 H2
Aileron Flaps
Elevator
Rudder
Dual Rates
H1
/
H2 10mm
/
10mm
H1
/
H2 13mm
/
13mm
H1
/
H2 11mm
/
11mm
H1
/
H2 21mm
/
21mm
H1
/
H2 18mm
/
18mm
H1 28mm
H1 15mm
H1
/
H2 12mm
/
12mm
Aileron
Elevator Rudder Flaps
Low Rate
High Rate
D
/
R Rate
：
100
%
D
/
R Rate
：
100
%
D
/
R Rate
：
100
%
D
/
R Rate
：
90
%
D
/
R Rate
：
85
%
D
/
R Rate
：
85
%
TA-152H1
Item No.:FLW05
Select the appropriate location,
cook mark. Make sure the three
points in the middle position.
Install the loose-leaf
Step one
Use knife to cut the
surface control
Step two
As the right photo shown, choose
two or three position, attach the
glue on the long end of loose-leaf,
and insert to the three positions.
Step three
As the right photo shown,
repeat the "step two", attach
the control surface to the
loose-leaf.
The surface control use no-hinge connection design, although after a lot of use, has proved to be a reliable
design. However, we don't exclude, in the use process, due to the errors, and cause the control surface fall off.
So, our package box includes one plastic pin hinge, its convenience to revise and strength the control surface.
Please refer: