4
A
B
A
B
C
D
A
B
C
D
PNP
Install instructions
1.As the photo shown, install the
left/right elevator on the tail fuselage.
2.Turn over the fuselage, and use 4 pcs
screws to fix the elevator.
A
-
Carbon tube
B
-
Screw
(
Ø4x200mm)
(
KA2.3x8mm
4pcs
)
Install elevator
Install elevator/rudder pushrod
1.Insert one side of elevator pushrod A ,through plastic
tube B, to the servo arm C.
2.Buckle the clevis of elevator pushrod to the rudder horn D.
1.Insert one side of rudder pushrod A ,through plastic tube B, to the servo arm C.
2.Buckle the clevis of rudder pushrod to the rudder horn D.
Note:
when install on the rudder pushrod, we need to make sure our tail
gear is in the center. Then install the rudder pushrod, and adjust the plastic
clevis to center the rudder.
1.Use glue to attach the rudder horn on the rudder.(as the
left photo shown).
2.Use rudder pushrod to connect the tail gear steering arm
and rudder horn.
TA-152H1
Item No.:FLW05
Summary of Contents for TA-152H1
Page 1: ...EN 中 1 11 12 22 ...
Page 11: ...10 10 TA 152H1 Item No FLW05 ...
