MAN_DZ7_001 Rev 1.1 Flightcell® DZMx Plus Installation Manual
Page 48 of 61
Effective Date: 28 Jun 2021
To specify the default internet gateway, the DZMx Plus will where the internet
connectivity is coming from a specific IP gateway (contact your cell network
provider for more information) i.e. 192.168.4.100, then press ENTER. Press
END to return to the main screen.
2.
To override the default DNS server configuration using the DZMx Plus Control
Head keypad select Menu > Hardware Config > Wireless and Networks >
DNS Configuration > DNS Server IP Address #1> press ENTER.
Specify the IP address for the Primary DNS server, then press ENTER. Repeat
this step for the DNS Server Address #2 to specify the Secondary DNS server IP
Address. Press END to return to the main screen.
Applying the Specified Static IP Configuration
To apply the specified static IP settings and optional settings, Default gateway and
DNS use the DZMx Plus Control Head keypad.
Select MENU > Hardware Config > Wireless and Networks> Select IP Address Mode
> Static IP Address > press ENTER.
This process can take a few seconds. A window
advising “
Ethernet configuration
update please wait
” will appear.
Press END to return to the main screen.
Configure Cellular Data
To enable or disable cellular data using DZMx Connect.
1.
Go to Settings > Modems > Modem 2.
2.
Toggle “
Enable Data
”
to on to allow cellular data to be used.
3.
Set Data Roaming to allow cellular data to be used outside the area coverage of your
cellular data account.
Set the Access Point Name (APN).
The APN setting must be configured to enable a data connection to be established. The APN
is the name of the setting your cellular modem uses to set up a connection to the gateway
between your carrier's cellular network and the public Internet. The APN you need to
specify will depend on the cellular network service provider. The APN is often published on
the service provider's web site.
This setting is easier to enter using DZMx Connect as you can type in or paste in the APN. It
can also be entered using the DZMx Plus Control Head.
Note
: To check which IP address is in use for the Ethernet connection,
using the DZMX Plus Control Head keypad.
Select Menu > Diagnostics Menu > About DZMx. The Ethernet IP address will be
displayed.
Note:
Data roaming can incur significant charges
!
