Flight DEFENDME Aerosol Evacuator R.1.2
6
4.0
Installation
4.1 Removing the Protective Foam
Before using the machine for the first time, please remove the foam at the bottom of the main
filter assembly otherwise the machine will not work properly. Please refer to the following steps
to remove the foam.
Step
Diagram
Description
1
Removing Top Cover:
Remove the top cover by undoing the 4
latches marked by the blue arrows and
remove the top cover.
2
Remove the main filter assembly:
Remove the rubber gasket/seal and filter
elements in sequence. Then take out the
main filter assembly circled in the
diagram.
3
Remove the foam:
Remove the foam installed at the bottom
of the main filter element. The foam can
be discarded accordingly.
4
Reassembling the Unit:
Reinstall all the filters in the same order
that they were removed and secure the
four latches to the top cover. Ensure that
the gasket is flat and that the top cover is
secured before using.
