FW3471 User’s Manual
M4068-00
32
Seyeon Tech Co., Ltd
8.1.3. Transparent Mode
When there are two FlexWATCH
™
Servers present on the network, they can act like a transparent
interface between two different UART devices so that the communication between the UART devices can be
made transparently without a flaw.
Line Mode
: The type of communication protocol
Baud Rate
: Data transfer rate
Data Bit
: The number of bits in data
Stop Bit
: The number of stop bit
Parity Bit
: Parity bit characteristic
Network Protocol
: The type of protocol used to send data
Peer IP
: IP address of other FlexWATCH
™
server
Network Port
: Network port number of the server
Data Start Pattern
: Data start pattern (Not used if unchecked)
Data Size
: Data size in single transfer (Not used if unchecked)
9. Advanced Configuration
FlexWATCH can be configured to start and stop certain pre-defined services by scheduling, event, or
conditions. It also has ISENS feature, which is a way of integrating FlexWATCH with CMS software.
You can set up the advanced services in
Advanced Configuration
menu.
There are two types of advanced service, one is
Buffered Service
and the other is
Periodic Service
. In
