background image

FW3471 User’s Manual 

 

 

M4068-00 

Seyeon Tech Co., Ltd 

 

FW3471 User’s Manual 

Document Part Number: M4068-00 
Document Version: 4.14 
Revised: Oct. 13, 2012 
 

About This Document 

This document is prepared for users of FW3471 supplied by Seyeon Tech Co., Ltd. It is assumed that the 

users are familiar with Microsoft Windows operating systems and Web browsers such as Internet Explorer. 

It is also assumed that the users are well aware of how to install and use the network equipment such as LAN, 

Hub, router, and having basic knowledge of network terminologies. If you have any questions regarding 

network installations, please contact your network equipment vendor or network administrator or Internet 

service providers. 
For updated contents, detailed features and other applications from Seyeon Tech, please refer to the user’s 

manual in CD-ROM provided with the product you purchased, or visit Seyeon Tech’s Internet homepage at 

http://www.flexwatch.com/

 

Copyright Notice 

Copyright ©  2012 Seyeon Tech Co., Ltd. All rights reserved. 
No part of this document may be reproduced in any form or by any means without the prior written 

permission of Seyeon Tech Co., Ltd. 

 

Disclaimer 

Seyeon Tech Co., Ltd. (Seyeon Tech) Makes no representations or warranties with respect to the contents 

hereof. In addition, information contained herein is subject to change without notice. Every precaution has 

been taken in the preparation of this manual, nevertheless, Seyeon Tech assumes no responsibility for errors 

or omissions or any damages resulting from the use of the information contained in this document. 

 

Trademarks 

FlexWATCH

®

 and FlexWATCH

®

 Logo are trademarks of Seyeon Tech Co., Ltd. 

Windows and Internet Explorer are a trademark of Microsoft Corporation. 
All other trademarks belong to their respective owners. 

 

Technical Support 

For technical support call, email, or visit our web site. 
Telephone: +82-2-2192-6840~1 
Email: 

[email protected]

 

Web site: 

http://www.flexwatch.com

 or 

http://www.seyeon.co.kr

   

Summary of Contents for 3471
















































Reviews: