FW3471 User’s Manual
M4068-00
21
Seyeon Tech Co., Ltd
6.5.3. Delete
To
delete an existing user, select
Delete
.
From the list of the users, select a user to delete. Click
Delete
button to confirm the deletion.
7. Network Configuration
Configuration the network is dependent on how an IP address is assigned in Ethernet-based
environment, which is static IP, dynamic IP (DHCP). For wireless LAN, additional configuration is necessary to
have a connection with wireless AP.
In the case of wireless models, users have to choose between wired or wireless connection. In other
words, both connections can’t be used at the same time. The way how to choose one of them is whether wired
LAN cable is plugged into the product. When LAN cable is plugged in for longer than 5 seconds, the wired LAN
is activated for data transmission. If LAN cable is unplugged more than 5secconds, wireless LAN is activated
instead. If DHCP Client is selected by user, wired LAN will be activated regardless of condition of LAN cable.
For network configuration, select
Network configuration
from Admin page.
To make a connection to the Internet, it is
required to figure out the type of the Internet service you’re
using. Depending on the service type, the network configuration can be in any of
Static IP
,
DHCP Client
. You
need to set up the FlexWATCH
™
Server according to your network type.
Note: If the HTTP port number is changed to other value than default (80), make sure
the new HTTP port number goes together with the FlexWATCH
™
Server's
Internet address. For example, when FlexWATCH
™
’'s IP address is
192.168.1.00 and set the HTTP port to 8080, you will have to enter
http://192.168.1.100:8080 to connect to the server.
