FW3471 User’s Manual
M4068-00
30
Seyeon Tech Co., Ltd
8. Device Configuration
You set up the connection between FlexWATCH
™
Server and the camera in this part of configuration.
That includes Video data, external devices, Input / Output, Alarm control, and etc.
8.1. Serial Ports Configuration
There are two serial ports configurable in the system, COM and AUX. COM port is primarily used for
console, and AUX is for PTZ control, but they both can be used for other purposes when necessary.
8.1.1. Serial Input Mode
When serial ports are in
Serial Input Mode
, FlexWATCH Server can be triggered by the external
sensors to send images from the camera by email, or FTP. It can also activate
Alarm Output
by input from
sensors inputs. For example in a real life, if a dam’s water level comes to a pre-defined value, the server can
send the images of the dam’s water level meter from cameras. Another example is, when a car running on
highway exceed the speed limit, it can send the picture of the car.
To configure, click
Serial Ports
on Device Configuration. In
COM Port
or
AUX Port
, select
Serial Input
and click
Apply
button to apply the change. The system will reboot then.
