webdyn.com
V2.0 subject to changes | Webdyn © by Flexitron Group
29
The Hall effect sensor is used for various actions such as:
•
Requesting the current operating mode and activating the interfaces for local configuration.
• Changing the operating mode.
• Re-applying factory settings (combined with the RESET button).
2.4.4.2 RESET Button
The RESET button has two functions:
• Restarting the product: a short press on the button
• Re-applying factory settings by following this procedure:
• Place the magnet on the top of the box opposite the Hall effect sensor and keep it in
place.
•
Briefly press the RESET button.
• A long beep (1 second) is issued, informing that the factory settings have been re-applied.
• Remove the magnet.
2.4.4.3 Modem LED
The Modem led lights when the modem is activated to upload files to the remote server.
2.4.5 USB Interface
The hub USB interface can be used for:
•
Configuration.
• Commands.
• Product updates.
For proper operation, it is essential to strictly follow the steps below:
• Switch the WebdynEasy W M-Bus to RUN mode.
• Connect the hub to a computer using a USB cord (A male - mini B male type).
• A new drive called “WebdynEasy W M-Bus” will appear on the computer (like a thumb drive).
• Open this drive.
•
Copy the configuration, command or update file to the hard drive.
•
Eject the removable drive and wait for confirmation from the system.
• Press the RESET button.
