20 |
•
The device is designed for operation inside buildings, at
temperatures above 0
o
C. In low temperatures (below 0ºC)
there is a danger of freezing of the medium.
The manufacturer bears no responsibility for damage
……
of the heat exchanger resulting from freezing of the
……
medium in the exchanger.
It is forbidden to place any
……
objects on the heater or to hang any objects on the
……
connecting stubs.
•
The device must be inspected periodically. In the case of
incorrect operation of the device it should be switched off
immediately.
•
It is forbidden to use a damaged device. The manufacturer
bears no responsibility for damage resulting from the use of
a damaged device.
•
If it is necessary to clean the exchanger, be careful not to
damage the aluminium lamellas.
•
For the time of performing inspection or cleaning the device,
the electrical power supply should be disconnected.
•
In case water is drained from the device for a longer period
of time, the exchanger tubes should be emptied with
compressed air
8. OPERATION
Summary of Contents for ELIS B-E-100
Page 7: ... 7 7 8 9 10 11 12 13 14 ...
Page 10: ...10 1 2 3 4 5 6 7 ELiS B W N 8 ELiS B E 4 2 CONNECTING GUIDE ...
Page 25: ...26 ...
Page 26: ... 27 ...