Flexco Novitool PUN M 300, Safety And Operation Manual

Page: 3 / 44

1
2
3
4
5
6
8
7
10
9
—3—
+
-
Main Components
Description
1. C-Frame Handle
2. Belt Clamp Bar
3. Punchblock
4. Belt Stop
5. Punchboard with Finger Knives
6. Lock Handle
7. C-frame
8. Punchboard Tray
9. C-frame Wedge
10. Fixation Screw and Punching Force Adjustment
The PUN M ™ is designed to punch fingers on the ends of
lightweight thermoplastic conveyor belts as a preparation for
making finger- or finger-over-finger splices.
The Pun M is manually operated and does not need electricity
or air pressure for its operation. The punching force of
11,000 lbs. (50 kN) is created by pulling the lever and is easily
done with one hand by an average person. Because of its easy
set-up and manual operation, the Pun M is an ideal tool for
working on location, as well as in a workshop.
Although all punchboards of the Pun M have a specified net
width, the open construction of the frame allows belts of
larger widths to be punched with these machines.
With one lever pull, a finger punch of 90 mm wide can be
made (based on 50 × 20 fingers for finger-overlap-finger
splicing) or 60 mm wide (based on 80 × 20 or 70 × 15 fingers
for single finger splicing). The maximum thickness is up to
5 mm for light weight belting.