5
1.1
Warranty, Limitation of Liability
Section 1 – Basic Specifications
Information!
Please note that the contents of this manual are not to be used or amended as part of any previous
or existing agreement, commitment, or legal relationship. All obligations of Flexco Europe GmbH/
the supplier arise from the respective purchase agreement, which also contains the complete and
solely applicable warranty regulation. These contractual warranty provisions are neither extended nor
restricted by the instructions in this operating manual.
The information in this operating manual has been carefully checked. Nevertheless, we can accept no
liability for any errors. To the best of our knowledge, all information and instructions for operation and
maintenance result from consideration of our previous experience and findings. With the exclusion of
further claims, we are liable for any errors or omissions as part of the warranty obligations within the
purchase contract. Claims for compensation, regardless of the legal reason for such claims, are excluded.
Flexco Europe GmbH assumes no liability and warranty for damage and malfunctions resulting from
non-compliance with this operating manual, improper installation or improper repairs by the personnel
of the operator.
Contact Flexco Europe GmbH if complications and uncertainties arise. In this way, major damage can
be avoided. Repairs may only be made by Flexco Europe GmbH. Only genuine replacement parts may
be used for repairs.
1.2
Intended Use
The Flex-Lifter belt lifter is intended solely for the raising and lowering of belts on conveyor belts.
The drive is carried out manually with an appropriate ratchet or by using a suitable power wrench (not
included as part of Flex-Lifter). Any other or additional use is considered to be improper, and is a misuse
of the device.
• The Flex-Lifter must be positioned securely in the frame of the conveyor belt, so that it can neither fall
nor tilt.
• The substrate must be sufficiently loadbearing.
• The drive of the conveyor belt must be stopped safely prior to raising. The belt must not move laterally
during the lifting process. If necessary, it must be effectively blocked before lifting.
• The safety distance from the top roller or the end roller must always be at least 6m.
• The maximum permissible working widths, heights and lifting capacities must not be exceeded, see
Section 3.2.
• The lifting rods of the return belt are intended exclusively to be attached to the ends of the troughing
belts. Please note the maximum permissible towing capacity.
• Please note the maximum permissible load of the lifting rods for the return belt. Only use the lifting
rods for the return belt with the original chains and accessories.
• The permissible environmental conditions must be complied with, see Section 3.2.
Summary of Contents for FL-L-EC
Page 55: ......
