45
5.4.2 Application on the Return Belt continued
Section 5 – Operation And Handling
Step 7b: Construct the lifting rod and attach the chains
The troughing belts must be in their original, flat position. Place the lifting rod below the return belt, and
support it.
Fig. 33
Attaching the chain to the lifting rod
Raise the long chains of the ends of the lifting rod on both sides. You can determine the chain length by
selecting an appropriate link and connecting it to the shortening clutch, see Figure 33.
When inserting the chain link into the shortening clutch, a metal tab clicks into place on completion.
To connect or disconnect, first remove the lifting rod. Press the metal tab on the shortening claw
inward by hand. With the other hand, you can now pull the chain link out of the shortening clutch, see
Figure 34.
1
2
3
Summary of Contents for FL-L-EC
Page 55: ......
