Flexco FL-L-EC, Installation, Operation And Maintenance Manual

Page: 19 / 56

19
3.2.6 Lifting Rods for Return Belts
Section 3 – Product Description
A lifting rod for the return belt is in the Flex-Lifter standard range of equipment for sizes M and L. This
is optional for Flex-Lifter size XL. The lifting rods are adjustable in width. The lifting rods for sizes M
and L are straight; the lifting rods for size XL are V-shaped (troughed).
The lifting rods of the return belt are intended exclusively to be attached to the ends of the troughing
belts. The lifting rods may only be used with the intended original parts (chains with shortening
clutches, bolts).
Information!
The chains must be checked regularly. Please note the national provisions. In Germany, DGUV
Regulation 100-500 (formerly BGR 500) applies.
Note the maximum permissible towing capacity at the fixing points of the troughing belts, see Section
3.2.5. The statements on the original signs on the device are binding.
Size M Size L Size XL
Tare weight of the lifting rod 10kg 10kg 28.6kg
Chart 4 Tare weight of the lifting rod
Size M Size L Size XL
Load capacity lifting
rod, maximum
550kg 680kg 680kg
Chart 5 Maximum permissible load capacity of the lifting rod
3.2.7 Transport Carriage
The transport carriage is optional. This is not part of the standard scope of equipment.
Designation For sizes M, L and XL
Empty weight approx. 9kg
Chart 6 Empty weight of transport carriage (optional)