Flexco FL-L-EC, Installation, Operation And Maintenance Manual

Page: 20 / 56

20
Flex-Lifter Belt Lifters
Section 3 – Product Description
3.2.8 Necessary Accessories
The tools required for manual raising and lowering (nut driver and ratchet) are included in the scope of
delivery. Power wrenches are not included in the scope of delivery.
Designation Size M Size L Size XL
Size of nut driver 19mm 19mm 24mm
Chart 7 Accessories
Chart 8 Environmental Conditons
3.2.9 Power wrench
Power wrenches are not included in the scope of delivery. Note the following when using a power
wrench:
Information!
Limit the torque of the power wrench to a maximum of 52Nm. This is sufficient for raising the
permitted loads. Do not push against the stop at full torque when lowering. This can damage the thread.
3.2.10 Environmental Conditions
Environmental conditions
Transport
and Bearing
Operation
Temperature -5 ... +65°C +5 ... +65°C
Explosion Protection
Explosive atmospheres are
not permitted
Explosive atmospheres are
not permitted
3.2.11 Information on noise
The Flex-Lifter itself operates almost silently. The noise level of the device in the workplace is <70 dB(A).
When using a power tool, such as a power wrench (not part of the Flex-Lifter), the noise level must be
taken into account. The noise level in the workplace environment must also be considered.