—8—
—9—
Electric Belt Cutter
Electric Cutter Operation
Tool Maintenance–Bearings
For best results: Always elevate belt. • Always use appropriate lubricant. • Always cut in low speed.
EBC1 / CEBC1
EBC2 / CEBC2
Unplug drill from power source prior to performing any maintenance.
Square belt using centerline method
Use of Cutting Guide
Make sure belt is clean. Spray area to be cut
with silicone lubricant (Flexco # 30932, not
included). Lift Blade Guard and insert belt
between Carriage and Blade Guard. Position
Electric Belt Cutter so that slot in Cutting Guide
is directly centered above cut line on belt.
Producing Square Edge during cutting
In order to produce a square edge during
cutting, hold Electric Belt Cutter perpendicular
to belt throughout the entire cutting
operation. Use two hands for operation.
Belt Cutting
Position Electric Belt Cutter on edge of
belt at square line. Align Cutting Guide
on the Blade Guard with square line on
belt. Squeeze drill trigger to start drill.
Clean Belt Support Bearings when dirty. Wipe
Bearings with a clean cloth and a solvent such as
mineral spirits.
Support Bearings may be taken apart for a more thorough cleaning. Replace Bearings in the order
shown above.
