1/4/2021
REV. 002
10
9.
Actuate the motor by depressing the throttle lever and gently guide the tap into the hole. Exert only
enough downward pressure to start the tap in the hole. Once started, the tap will pull itself through
the hole.
Do not push or pull on the motor when the tap is engaged in the hole and completing the tapping
process. This will result in poor thread quality, oversized threads, and broken taps.
10.
When the hole is tapped (the torque holder rachets for blind holes or the tap extends past the bottom
of through holes) actuate the throttle lever and reverse button at the same time to reverse the
rotation of the motor and remove the tap from the hole.
11.
To change tap holders, release the tap holder by pulling up on the quick-change chuck collar and
pulling the tap holder out of the quick-change chuck.
Summary of Contents for FLEXARM RNR
