LBE 125 18.0-EC/LB 125 18.0-EC/L 125 18.0-EC
25
To switch off the power tool, release
the switch rocker by pressing the rear
end.
NOTE
Following a power failure, the switched on
power tool does not restart.
Preselecting the speed
(for LBE 125 18.0-EC)
To set the operating speed, press the
speed control button. Selected speed is
maintained even when switching off.
Gently press the switch to accelerate the
power tool up to the preselected speed.
CAUTION!
Risk of injury due to destruction of the tool.
Use the appropriate tool for the job.
NOTE
–
Overload protection: switches the
machine off in the event of overload.
–
Sensor-controlled temperature
monitoring: If there is a risk of
overheating the machine switches off.
Adjusting the guard
To adjust the tool to the task at hand, the
guard hood can be adjusted by 12 notches
on 360° without a tool.
CAUTION!
Risk of injury! Wear protective gloves.
Remove the battery.
Turn guard hood opposite to the
direction-of-rotation arrow on the gear
head to the required position.
Work instructions
NOTE
When the power tool is switched off,
the grinding tool continues running briefly.
Rough-grinding
WARNING!
Never use cutting-off wheels for rough-
grinding.
– Angle of wheel 20–40° for best cutting
performance.
– Applying moderate pressure, move the
angle grinder backwards and forwards.
As a result, the workpiece will not
become too hot and there will be no
discoloration; nor will there be any
grooves.
Cut-off grinding
WARNING!
A special cutting guard must be used for
cutting.
See manufacturer’s accessories catalogue.
– The angle grinder must always be
operated backwards.
