Flex innovations Cessna 170 60E G2, Instruction Manual, Page: 9 / 28

8
MAIN WING INSTALLATION
Required Tools and Fasteners : #2 Phillips Screw Driver (4) M3x25 Phillips Head Machine Screws
(4) 6mm Strut Retaining Pins
(4) Strut Retaining Pin Keepers
1. Insert the main wing tube into one of the main wing halves.
2. Slide the tube through the hole in the fuselage. Connect the all-in-one servo lead to the receptacle in the wing.
3. If you have a night version, connect the wing JST to the LED controller JST.
4. Slide the other wing half onto the tube, and make any connections as completed in the previous step. Fully seat the wing into the plastic
mounts in the fuselage. Do not force it into place.
5. Secure each wing panel to the fuselage using 2 M3x25 Phillips head machine screws. Don't over tighten.