Flettner Floor Vent, Manual

Page: 2 / 20

English - Fitting Instructions
VERY IMPORTANT - Read this first
Make sure that all work is planned, organised and carried out by a competent
person.
Wear work gloves and safety glasses when fitting the Floor Vent to avoid
injury from sharp metal edges and swarf.
Use of waterproof adhesive sealant is
recommended.
For further resources and assistance,
visit flettner.co.uk.
Contents
(A) Preparing the floor
1. Identify a location in the vehicle floor free from fuel tanks, tyres, wiring,
mechanical components, etc.
2. Using the actual size template supplied in
figure 1
, mark and drill the
2.5mm (1/8”) pilot hole for the hole saw. IMPORTANT Take care to leave
clearance for the Ø 119mm (4.69”) top vent grille.
3. Using an 83mm (3 1/4”) hole saw, drill the hole for the Flettner Floor Vent.
4. Use an appropriate rust inhibitor to treat any bare metal surfaces.
5. Clean the floor where the Flettner Floor Vent will be installed.
1 x Floor Vent Gasket 1 x Flettner Floor Vent