Flettner Floor Vent, Manual

Page: 5 / 20

(B) Installation
1. Peel off one yellow tape backing on the Floor Vent Gasket and apply the
gasket to the underside of the rim of the Floor Vent.
2. Orient the Floor Vent so that the bottom opening/ grille faces towards
the rear of the vehicle or
away
from any local water spray e.g. wheels.
3. Peel off the second yellow tape backing on the gasket and stick the Floor
Vent down to the floor.
4. Apply pressure for 30 seconds to ensure good adhesion.
5. Apply waterproof adhesive sealant to the floor around the edge of the
Floor Vent gasket.
6. Apply waterproof adhesive sealant to the underside of the floor to fill any
gaps around the Floor Vent.
(C) Final checks
1. If the Floor Vent is installed correctly there should be no vertical or
lateral movement.
2. If you are unsure of the final installation, please check our frequently
asked questions or contact us for further support.