FLENDER N-EUPEX DK, Assembly And Operating Instructions Manual

Page: 32 / 68

Assembly
5.2 Assembling the coupling
32 Edition 09/2022 M3105-02en
Figure 5-3: Position of the balancing bore for single-plane balancing
① Balancing bore ② Coupling part 1 (101; 102)
Figure 5-4: Position of the balancing bore for two-plane balancing
① Balancing bore ② Coupling part 1 (101; 102)
Information
A better balancing result can be achieved by balancing the coupling parts (2 and 3) when
they are bolted together as an assembly unit. When total balancing, mark the position of the
components relative to one another.
5.2 Assembling the coupling
5.2 Assembling the coupling
NOTICE
Coupling damage by combining various different parts.
Use coupling parts 41 (411) und (412) as supplied by the manufacturer. It is not permiss-
ible that the half shells of coupling parts 41 (411) and (412) are interchanged with one an-
other. Carefully observe the marking.