NOTE: The unit will be marked either on the back of the valve body itself with the word
"IN" and "OUT" and/or on the top of the body of the bypass valve assembly with arrows
Remove PVC tales from bypass valve
Wrap Threads on tales with Teflon tape
Pick up two- 1” or 1.25” female adaptors available at any hardware store
If using copper, wrap a wet cloth around pvc tales, Solder a 3" to 5" piece copper
pipe into each adapter Once you have the copper pipe soldered into these adapters,
wait until they are cool enough to touch then screw them onto the tales.
Attach all fittings between main line and tales then proceed to soldier joints starting
from the main line working your way up to the water softener.
We do not recommend applying heat from a soldering torch to soldier copper pipe to
your new valve/meter assembly. So make sure you wrap the pvc tales with a wet cloth to
help heat from transferring.
Page 3 of 7
Copyright © 2006 Quality Water Treatment, All right reserved. www.qualitywatertreatment.com
