Remove and disassemble the draw spout. Set aside the
cap, spring and valve for use with the modified assembly.
2
1
Determine which side, left or right, the Auto Draw Valve
Assembly is to be installed. Remove the freezer door and
spout assembly from the freezer.
ADPT TY80S-FCB2 FCB Auto Draw Valve Conversion Kit
Installation
Flavor Burst
®
REV021313
pg. 1 of 6
This kit converts the Flavor Burst
®
FB 80Sa frozen beverage system to a Flavor Burst
®
auto draw valve FCB system.
When attached to an FCB freezer, this system allows for push-button dispensing without the use of a draw handle.
This kit also includes a purge feature to help reduce flavor carryover between servings. The following instructions are
for a field conversion of the freezer. For more information, please contact your local Flavor Burst
®
distributor.
EPROM
FIX 1036
Elbow
Connector
ADPT TY80S-FCB2
INJ 201A
Syrup Line
Manifold
FCB 142
CABLE MOUNTING PLATE
ASSEMBLY & ‘D’ ROTOR CABLE
(FCB 127R
vent bracket)
(FAS 2014
8-32 x 1/2” screws x2)
FCB 138A AUTO DRAW
VALVE ASSEMBLY
TEMPLATE
FCB 141B
PANEL MOUNT
CONNECTOR & LINE
FCB 237
CYLINDER
ASSEMBLY
FCB 112
MODIFIED SPOUT
FCB 126
DRAW SWITCH
HOUSING ASSEMBLY
FCB 140
TEE & C TUBE
TAY 046193-BLA
(x2)
FAS 2135
Truss Screws (x2)
TAY 039321
DRAW HANDLE PIN ASSEMBLY
ADPT TY80S-FCB1
MAN 80FCB-OM
Auto Version
Operations Manual
NOTE:
BE SURE THE FCB FREEZER IS EMPTY OF PRODUCT BEFORE INSTALLING THIS KIT.
